Engraved Plumbing Equipment & Service Plates | ENMECA

Plumbing companies

Custom Engraved Equipment & Service Plates for Plumbers

Identify the system. Leave your company information with it.

An engraved aluminum mounting plate can identify a water heater, shutoff valve, pump or softener and keep your company name, phone number or a QR code with the installation.

See the Two Sizes Why It Helps
  • 2″ × 0.74″ and 3″ × 1.5″
  • Name, phone, equipment or QR code
  • Same design or different on each
Engraved plumbing equipment and service plates: a red aluminum plate with a plumbing company logo and a QR code, and a black plate reading Summit Heights Plumbing 513-555-0198, surrounded by wrenches, copper and brass fittings, braided supply lines and white pipe

Examples

What Can You Put on a Plumbing Plate?

Your company name, logo, phone number, website or a QR code, plus equipment or system numbers, installation dates, valve and shutoff identification or a short note:

  • Company / phone

    Shown on 2″ × 0.74″

  • Shutoff identification

    Shown on 2″ × 0.74″

  • Valve identification

    Shown on 2″ × 0.74″

  • Equipment / installed

    Shown on 3″ × 1.5″

  • System number / phone

    Shown on 3″ × 1.5″

  • Company / QR code

    Shown on 3″ × 1.5″

The example QR code opens enmeca.com. Yours can point to a page you control, such as your company website, a service-request page, equipment information or an operating manual.

Why it helps

Keep Your Contact Information With the Installation

A finished look for a finished job

A handwritten tag or paper note isn’t always how you want to identify an installation. An engraved aluminum plate gives it a clean identification point with your company name, phone number or QR code.

Your information is there later

When the homeowner, property manager or a future technician needs plumbing service, your contact information is already with the equipment.

Where

Where Could Plumbers Use Them?

On or near equipment where appropriate, or in an appropriate visible location:

  • Water heaters
  • Tankless water heaters
  • Water softeners
  • Filtration systems
  • Sump pumps
  • Booster pumps
  • Well equipment
  • Shutoff valves
  • Manifold systems
  • Mechanical rooms
  • Commercial plumbing equipment
  • Installed specialty equipment

Custom engraved identification plates are supplemental identification only. They do not replace manufacturer labels, safety warnings, required code labels, regulatory labels or equipment rating plates, and should not obscure required information or interfere with service access.

Two sizes

Two Mounting Plate Sizes

Both are anodized aluminum, laser-engraved, with two mounting holes. Pick the size that fits the information you want to leave.

More room

3″ × 1.5″ plate

Room to combine more on one plate, for example:

Black anodized aluminum 3 by 1.5 inch rectangular mounting plate with a mounting hole at each end Green anodized aluminum 3 by 1.5 inch rectangular mounting plate with a mounting hole at each end

Actual plates, shown blank.

  • Logo, company name and phone
  • Company name with equipment information
  • Company name with a QR code
  • More detailed identification
Shop 3″ × 1.5″ Plates Design a 3″ × 1.5″ Plate

Ordering

Same Information on Every Plate, or Different Information

Same design on every plate

Choose the pack size for the total number of plates you need. If every plate uses the same design, for example “SUMMIT HEIGHTS PLUMBING / 513-555-0198” for every installation, you only create or send that design once.

Different information on each plate

Water Heater #1, Water Heater #2, Main Shutoff and Sump Pump make it a multi-design project, and you don’t need to design each plate yourself. Choose the pack size for the total number of plates, then upload your equipment list with your order. We’ll review it and produce the individual designs.

A spreadsheet, CSV or text file works. Attach it in Quick Order with Upload artwork or file (XLSX, XLS, CSV or TXT), and add your logo as PNG, JPEG, WebP, SVG or PDF artwork. We review the information and produce each plate from your list.

Example equipment list (one row per plate; plate text is sample custom text)
Location Equipment / System Plate Text Install Date QR URL Notes
Basement Water Heater #1 WATER HEATER #1 / 513-555-0198 06/2026 2″ black
Garage Water Heater #2 SUMMIT HEIGHTS PLUMBING / WATER HEATER #2 06/2026 https://summitheightsplumbing.example/service/water-heater-2 3″ black, logo + QR
Basement Main Shutoff MAIN WATER / SHUTOFF 2″ red
Utility room Softener SOFTENER / BYPASS VALVE 06/2026 2″ green
Basement Sump Pump SUMP PUMP / SYSTEM #2 07/2026 2″ black
Mechanical room Booster Pump BOOSTER PUMP / 513-555-0198 07/2026 2″ black
Upload a List: 2″ × 0.74″ Upload a List: 3″ × 1.5″

If you have questions or aren’t sure how to organize your file, contact ENMECA.

Getting started

Design It Yourself or Send Us What You Have

Live preview

Design it yourself

For one design, build the plate in the designer and see it before it goes in your cart.

  • Enter your text and choose a font
  • Upload your logo or artwork
  • Add a QR code
  • Pick a plate color
Design 2″ × 0.74″ Design 3″ × 1.5″

Quick Order

Send us what you have

Enter the text, upload your logo or a file, add QR information or describe what you need, and we’ll set it up for engraving.

  • Choose a color and how many plates
  • Text, artwork or file upload, QR information or a written description
  • Different plate for each system? Upload your equipment list
Quick Order 2″ × 0.74″ Quick Order 3″ × 1.5″

Get started

Keep Your Plumbing Company Information With the Equipment

Identify the systems you install and leave your company name and service information where people will look for it.

2″ × 0.74″ Mounting Plates 3″ × 1.5″ Mounting Plates Different Information on Each Plate? Upload Your List

Have questions? Contact ENMECA.

Back to blog

Leave a comment